Thursday 6 May 2021

Project C.H.E.E.T.A.H.

 

The goal with project CHEETAH is to build a box that makes you sound like a Synth Wizard without really knowing what you are doing. All you need to do is press a pedal (Major, Minor, Dominant) and ideas of that type will flow from your fingers.

Watch these videos for a full demonstration!



When you're ready to build one you can find the code and schematics at my GitHub Page 


Parts List (with Amazon affiliate links)


1 - Arduino Nano (clone version)
1 - 6N138 Optocoupler
1 - 1n914 Diode
2 -  5 Pin Midi Jack
3 - 220 Ohm Resistor
1 - 1K Ohm Resistor
1 - 470 Ohm Resistor
3 - Footswitch - SPST Momentary
1 - Adafruit Perma-Proto 1/2 Sized Breadboard
1 - Chip Socket - 8 Pin
1 - Header - 2 Pin - (or cut from longer Breakaway type)
1 - Jumper - 2 Pin
1 - Hammond 1590DD Aluminum Enclosure - Black preferred
1 - DC Barrel Jack - 2.1mm
4 - Rivets - 1/8" Aluminum - 1/4" Grip
2 - M3 PCB Standoffs - 10mm
4 - M3 x 6 - Button Head Bolts
4 - Rubber Feet - Adhesive


3 comments: