The goal with project CHEETAH is to build a box that makes you sound like a Synth Wizard without really knowing what you are doing. All you need to do is press a pedal (Major, Minor, Dominant) and ideas of that type will flow from your fingers.
Watch these videos for a full demonstration!
When you're ready to build one you can find the code and schematics at my GitHub Page
Parts List (with Amazon affiliate links)
1 - Arduino Nano (clone version)
1 - 6N138 Optocoupler
1 - 1n914 Diode
2 - 5 Pin Midi Jack
3 - 220 Ohm Resistor
1 - 1K Ohm Resistor
1 - 470 Ohm Resistor
3 - Footswitch - SPST Momentary
1 - Adafruit Perma-Proto 1/2 Sized Breadboard
1 - Chip Socket - 8 Pin
1 - Header - 2 Pin - (or cut from longer Breakaway type)
1 - Jumper - 2 Pin
1 - Hammond 1590DD Aluminum Enclosure - Black preferred
1 - DC Barrel Jack - 2.1mm
4 - Rivets - 1/8" Aluminum - 1/4" Grip
2 - M3 PCB Standoffs - 10mm
4 - M3 x 6 - Button Head Bolts
4 - Rubber Feet - Adhesive
1 - Adafruit Perma-Proto 1/2 Sized Breadboard
1 - Chip Socket - 8 Pin
1 - Header - 2 Pin - (or cut from longer Breakaway type)
1 - Jumper - 2 Pin
1 - Hammond 1590DD Aluminum Enclosure - Black preferred
1 - DC Barrel Jack - 2.1mm
4 - Rivets - 1/8" Aluminum - 1/4" Grip
2 - M3 PCB Standoffs - 10mm
4 - M3 x 6 - Button Head Bolts
4 - Rubber Feet - Adhesive
Spot on with this write-up, I truly think this website needs much more consideration. I’ll probably be again to read much more, thanks for that info.
ReplyDeleteGamerwellness.org
Information
Click Here
ในการเล่น BETFLIX เกมสล็อตแตกง่าย ทั้งยังมี Feature Buy ทำให้ผู้เล่น เข้าใกล้เงินโบนัสได้อย่างง่ายดาย เป็นหนึ่งในเกม BETFLIX เว็บตรงไม่ผ่านเอเย่นต์แตกง่าย
ReplyDelete