Thursday, 28 February 2019

TEENSY-Synth PART 11 - ENCLOSURE

After a lot of long nights in the lab I have finally finished the enclosure for the TEENSY-Synth! This was a challenging build and I had to pick up a few new tricks along the way, but I'm really happy with the way it turned out.


Download the files for this project HERE



Here are the exact parts for this project and where I purchased them.

Parts List:


Mouser Electronics

1 - Enclosure: Hammond 1590DDBK
15 - Potentiometers: 652-PTV09A-4025FB103
15 - Knobs: 450-4760
1 - USB Connector: 523-UE27-BC54-130
1 - 6N138 Optocoupler: 782-6N138
1 - Midi Jack:161-0005-E
1 - 1n4148 Diode: 512-1N4148
1 - 74HC4067 Multiplexer: 595-CD74HC4067M96
1 - LM7805 Regulator: 926-LM7805CT/NOPB
1 - 1N4001 Diode: 863-1N4001G
1 - 100uF Electrolytic Capacitor: 140-RGA101M1EBK0611G
1 - 10uF Electrolytic Capacitor: 80-ESK106M035AC3AA
1 - 220 Ohm Resistor (1/4 Watt): 603-CFR-25JR-52220R
1 - 470 Ohm Resistor (1/4 Watt): 603-CFR-25JR-52470R
2 - 0.1uF Capacitor: 594-K104M15X7RF53L2

Amazon

3 - Toggle Switch: SPST
1 - Barrel Jack: 2.1mm
1 - 1/4" Jack: Mono TS
4 - M3 Standoff: 10mm
8 - M3 Screw: Button Head 5mm


No comments:

Post a Comment