Amazon Banner

Thursday 28 February 2019

TEENSY-Synth PART 11 - ENCLOSURE

After a lot of long nights in the lab I have finally finished the enclosure for the TEENSY-Synth! This was a challenging build and I had to pick up a few new tricks along the way, but I'm really happy with the way it turned out.


Download the files for this project HERE



Here are the exact parts for this project and where I purchased them.

Parts List:


Mouser Electronics

1 - Enclosure: Hammond 1590DDBK
15 - Potentiometers: 652-PTV09A-4025FB103
15 - Knobs: 450-4760
1 - USB Connector: 523-UE27-BC54-130
1 - 6N138 Optocoupler: 782-6N138
1 - Midi Jack:161-0005-E
1 - 1n4148 Diode: 512-1N4148
1 - 74HC4067 Multiplexer: 595-CD74HC4067M96
1 - LM7805 Regulator: 926-LM7805CT/NOPB
1 - 1N4001 Diode: 863-1N4001G
1 - 100uF Electrolytic Capacitor: 140-RGA101M1EBK0611G
1 - 10uF Electrolytic Capacitor: 80-ESK106M035AC3AA
1 - 220 Ohm Resistor (1/4 Watt): 603-CFR-25JR-52220R
1 - 470 Ohm Resistor (1/4 Watt): 603-CFR-25JR-52470R
2 - 0.1uF Capacitor: 594-K104M15X7RF53L2

Amazon

3 - Toggle Switch: SPST
1 - Barrel Jack: 2.1mm
1 - 1/4" Jack: Mono TS
4 - M3 Standoff: 10mm
8 - M3 Screw: Button Head 5mm


Posted by Dave at 12:00 pm
Labels: , ,

9 comments:

  1. Fox Burroughs8 October 2019 at 21:27

    Does kiCAD leave fill orphans on by default?

    ReplyDelete
  2. Selinn11 March 2020 at 04:40

    Where can I find PCB drawing

    ReplyDelete
  3. Rozer Baine20 March 2021 at 04:56

    It is truly a well-researched content and excellent wording. I got so engaged in this material that I couldn’t wait to read. I am impressed with your work and skill. you have shared information about enclosure Thanks. Electrical Enclosures

    ReplyDelete
  4. alexander3 April 2021 at 13:28

    ThX !!!

    ReplyDelete
  5. Seagate Controls1 July 2021 at 16:01

    I would like to give many thanks for posting such an informative post. I got some useful knowledge from this post. Thanks for posting it. Keep it up.eaton vfd

    ReplyDelete
  6. Jerso Falcu30 November 2021 at 20:41

    Your place is valueble for me. Thanks!

    Forums.prosportsdaily.com
    Information
    Click Here
    Visit Web

    ReplyDelete
  7. Garika Jello27 December 2021 at 23:18

    Nice post. I learn something more challenging on different blogs everyday. It will always be stimulating to read content from other writers and practice a little something from their store. I’d prefer to use some with the content on my blog whether you don’t mind. Natually I’ll give you a link on your web blog. Thanks for sharing.

    Ethicalhacker.net
    Information
    Click Here
    Visit Web
    Pixelation.org

    ReplyDelete
  8. Anonymous13 March 2023 at 12:06

    Where can I find PCB drawing?

    ReplyDelete
  9. Anonymous14 April 2024 at 08:40

    Is it possible to use Teensy 2.0? The Teenst 3.2 are almost impossible to purchase.

    ReplyDelete

Subscribe to: Post Comments (Atom)